# Church

Start **3D Model Builder (Geometry Pack)**

Click on and Project
**OpenBasic ModellingChurch**

Draw points

Draw a point at -40 -20

Draw a point at -20 -20

Draw a point at 0 -20

Draw a point at 20 -20

Draw a point at 40 -20

Draw a point at -40 20

Draw a point at -20 20

Draw a point at 0 20

Draw a point at 20 20

Draw a point at 40 20

Draw a point at -40 0

Draw a point at 40 0

Select all points

Press Pick as the action

Press the right mouse button and select **Select all** from the menu

Copy the points

Press Move as the action

Copy (hold CONTROL key) and move the points up to 28

Select points

Press Move as the action

Press Points to work with points

Click on 2 points (23 and 24 in our model)

Move the points

Move the points up to 65

Draw lines

Press Draw as the action

Press Lines to draw lines

Draw the new linesas illustrated

Draw the front side points

Draw the new linesas illustrated

Draw the 4 new pointsat the front of the church

Select point

Press Move as the action

Press Points to work with points

Click the bottom centre point on the front side (point 12 in our model)

Move the point

Move the point up to 50

Draw lines

Press Draw as the action

Press Lines to draw lines

Draw the new linesas illustrated

Select points

Press Move as the action

Press Points to work with points

Select the points on the front side as illustrated

Copy the points

Copy (hold CONTROL key) and move the points across to 54

Draw lines

Draw the new linesas illustrated

Draw points for the door

Draw the points for the door as illustrated

Draw points for the door

Draw the points for the door as illustrated

Draw the outline of the door

Draw the new linesas illustrated (make sure the lines are connected to all of the new points)

Reshape the door

Move the points as illustrated to make the door an arch shape on one side...

Reshape the door

..then do the same for the other side

Move the points

Move the points up to make the arch shape

Draw the window points

Draw the points for the window

Draw the window lines

Draw the new linesfor the window

Draw a point for the bottom of the door as illustrated

Draw the cross points

Draw the points for the cross above the roof

Draw the cross lines

Draw the new linesfor the cross

Draw the new lineson the sides of the church as illustrated

Draw triangles

Draw the triangles on this side of the church

Rotate the view

Press View Rotate as the action

Rotate the view to look at the other side

Draw the triangles for the other side as illustrated

Rotate the view

Press View Rotate as the action

Rotate the view to look at the front side

Draw the triangles for the front side as illustrated

Draw triangles

Press View Rotate as the action

Rotate the view to look at the back side

Draw the triangles for the back side...

Select points

Press Pick as the action

Press Points to work with points

Select the 4 points on the front side of the door (but do not select the points where the door hinges)

Draw the open doors

Press 3D Cursor as the action

Click on a point where the door hinges (point 35 or 37 in our model) this will the centre point of the rotation

Press Turn as the action

Copy (hold CONTROL key) and turn the points to "open the door"

Draw the open door lines

Draw the new linesfor the open door

Draw the other door

Perform the same tasks to create the other door

Draw triangles

Draw the triangles for the doors

Press **Save** to save the model